Dosing Systems

 

Hrushikesh Dosing Systems!  Trouble free, economical way to dose chemicals!

 

Manual as well as Automatic option available
  • State-of- the art, accurate and reliable systems, which can be used for variety of chemicals.
  • Reliable and economical electro-magnetic or motor driven metering pumps, which can be adjusted from 10% to 100% of the maximum flow by frequency and / or stroke adjustment.
  • Variety of materias for liquid ends for assured leak-proof operation with wide variety of chemicals.
  • Available in wide range, from 1 to 100 liters / hr and pressures from 2 to 125 kg/cm2
  • Compact & sleek, it has a convenient control panel that controls all operation. Complete automation possible with additional instrumentation. Complete intigration possible with other equipments, systems.
  • Easy to install, Easy to operate, Economical to use, Easy to maintain.
  • Complete package; HDPE semi-transperent Tank, Low level safety switch, Inlet / Outlet - tubing / piping, suction strainer with foot valve, discharge valve, air vent valve and One set of operation manual along with dosing system.
  • Depending on type of chemical; Optional motorised mixer also available for better desolution of chemicals.
  • Service & spares readily available.

 

OPERATION OF THE DOSING SYSTEM

 

Manual operation- Prepare / pour chemical solution of required concentration in the tank. Agitate the solution for proper mixing. start the pump. The dosing volume can be adjusted from 10% to 100% with the impulse-adjusting knob. Dosing flow (ml/hr) = {Main flow (m3/hr) X ppm dosage (g/m3)} / Solution concentration % Pump will automatically stops when level of chemical solution in the tank goes below set low level. Automatic operation- Prepare / pour chemical solution of required concentration in the tank. Agitate the solution for proper mixing. start the pump. The dosing volume will be adjusted from 10% to 100% with the impulse-adjusting knob automatically by receiving the signal from down stream suitable instrument (pH, ORP, Conductivity, etc.). Dosing flow (ml/hr) = {Main flow (m3/hr) X ppm dosage (g/m3)} / Solution concentration % Pump will automatically stops when level of chemical solution in the tank goes below set low level. It can also give the alarm.

 

APPLICATIONS

 

PUMP'S LIQUID END MATERIALS

 

PP, PVC, PVDF, TEFLON, SS

 

TECHNICAL DATA OF STANDARD SYSTEMS

 

Electrical 220V AC, 50 HZ
 
MODEL NO.
FLOW RANGE 
LITERS / HOUR 
MAX. PRESSURE KG/CM2
PUMP LIQUID END MATERIAL
POWER REQUIREMENT WATTS
HDPE TANK CAPACITY LITERS
HD-1
0.1 TO 1
 3.5
250 x 1200
20
60
HD-5
0.5 TO 5
 3.5
330 x 1420
20
80
HD-10
1 TO 9.5
 7
400 x 1700
40
180

Specifications are subject to change without notice. Optional features shown are available at an additional charge.

 

We don't just sell products, we provide solutions!

 

For all your water related problems contact us! We will provide you technically best suitable but most economical solution!